Vantec NexStar HX Boîtier pour Disque Dur 3.5” SATA III 6Gbps – USB 3.0 avec Ventilateur (NST-387S3-BK)

NexStar HX, 3.5" SATA III Hard Drive Enclosure USB 3.0 with Fan

NST-387S3-BK

The NexStar® HX, 3.5" SATA III Hard Drive Enclosure USB 3.0 with Fan is a totally redesigned enclosure. This sleek enclosure will keep your hard drive safe and cool. It features a hard aluminum case and tray that effectively draws away the heat while an active-controlled 60mm fan pushes cool air through the enclosure ensuring your hard drive is cooled while in use. This NexStar HX comes with smart and green features to extend the life of the drive by spinning down when the system goes to sleep thus saving energy when it is not in use. With the latest UASP protocol and SATA III 6Gbps support, transferring and backing up files are faster. This NexStar HX product is a name that stands for solid and durability, it will last for a very long time.

IMPORTANT NOTE: After installing your hard drive, If it is NOT connected to a working system, it will NOT spin up, the FAN will not work. It is a Power Saving function (Green). DO NOT assume the unit is defective, it is not. Please make sure your system is Powered ON, cables are fully connected before you power ON the enclosure.

• 
  Design For Large Capacity Drive
• Power Saving function (Green), will not waste energy if not connected or if system is off 
• SATA III specification max 6Gbps (Backwards Compatible With SATA II/I)
• Adopt UASP to Enhance Maximum Performance of Hard Drive for Windows 8/10/11 
• Aluminum Casing Cools Down Your Hard Drive
• Vents To Exhaust Hot Air To Let In Cool Air
• Maximum Transfer Rates Up to 5 Gbps w/USB 3.0
• Large 60mm Fan with On & Off/Variable Switch
• Easily Add Storage to Any System with USB 3.0, 2.0, or 1.1
• Hi-Quality Shielded USB 3.0 Cable Ensures Data Integrity and Speed
• Hot-Swappable: Plug & Play Without Rebooting
• No Drivers Needed (NDN) for Windows OS and OSX
• Enclosure Design to Stand Vertically with or without Enclosure Stand or laying on side with Fan facing up. 

Model: NST-387S3-BK

Device Support:    SATA III/II/I Hard Drive

Device Size:    3.5” Standard SATA Drive 

Internal Interface:    Standard SATA

External Interface:    USB 3.0 Type-B

Interface Cable:    USB Type-B to Type-A

Interface Cable Length:    39 inches, 1000 mm 

HDD Capacity:    Up to 16TB click here for detail 

Power Supply:    AC Adapter, Output: 12VDC, 2A  click here for detail 

Material:    Mainly Aluminum, Minor ABS Plastic

Enclosure Dimensions without stand:    8.5 x 4.8 x 2.0 inches / 217 x 123 x 50 mm

Enclosure Dimensions with stand:    8.5 x 5.1 x 2.8 inches / 217 x 130 x 72 mm

Enclosure Weight:    4.4 oz. / 125g

OS Support:    Windows 7/8/10/11 32-bit and 64-bit; OS X 10.6, or greater 

System Requirements:

OS with USB storage support

USB 3.0 Type-A port 

What's included: NexStar® HX Enclosure, Enclosure Stand, Ac Adapter, Screw Set, USB cable, Quick Install Guide

EAN: 4716872103478

UPC: 844767023021

Environmental:

Operating Temperature 0 ℃ to +45℃

Operating Humidity 10% to 85 % RH (no condensation)

Storage Temperature -10℃ to +70℃

Storage Humidity 5% to 90% RH (no condensation)